The Secret to Having Beautiful Pool Water – Reducing Chemicals and Preventing Pool Problems

The secret to having beautiful pool water, reducing chemicals and preventing pool problems

Proper swimming pool maintenance can prevent common problems such as green pool water, cloudy water, pool staining, itchy eyes, pungent chlorine smell and the spread of various waterborne diseases. We all want beautiful, clean, clear enjoyable pool water that is soft to the skin and easy on the eyes, hair and swimwear.

Everyone wants a beautiful pool with as little effort as possible! With the use of the Crystalline Pool System maintaining a beautiful, sparkling clear pool with soft enjoyable water with no chlorine smell is a breeze. Your swimming pool water treatment consists of a little bit of chlorine and a weekly application of Crystalline and that is typically it!

Swimming Pool Maintenance Tips
Owning a swimming pool is a privilege but to enjoy a nice beautiful pool with minimum hassles and expense requires some basic responsibilities.
Remember an ounce of prevention is worth a pound of cure! If you let your pool water get out of balance and your pool water becomes green or cloudy/murky, burns your skin or smells strongly it may costs you a lot more to get it back to a sparkling clear, beautiful state than if you never let it get away from you in the first place! Pool maintenance is essential and cannot be neglected, especially during the swimming season. Fallen leaves and other organic matter in the pool eventually decompose and attract bacteria. Pool maintenance should be carried out throughout the year, irrespective of the pool type, with un-screened pools needing the most attention. Below is a schedule, that if followed should help maintain beautiful, soft, clear pool water year round.

Check Skimmer Basket: The skimmer basket must be checked and cleared of debris, so as to ensure fresh and circulating pool water. Debris such as leaves, insects, bird droppings and other substances must be cleared from the surface of the pool by using a leaf net or leaf bagger. Leaves and other debris at the bottom of the pool must also be cleared by using a leaf net or bagger.

PH Level: Maintaining the right water balance is very important. The pH level is the measure of acidity or alkalinity, and should to be tested weekly. The pH level in the pool water must be slightly alkaline, that is a pH of around 7.2-7.6 must be maintained. It is at this pH level that chlorine is most effective. Moreover, this level is similar to the pH of our skin. It can be controlled by adding either an acid or an alkali such as baking soda. Incorrect pH levels can lead to damage of pool surface and pool equipment!

Chlorine Level: Sanitizing pools is equivalent to sterilizing the pool, whereby bacterial and algal forms can be destroyed. Inadequately sanitized pools can become breeding grounds for bacteria. The range of ‘free’ chlorine that has to be maintained in the pool is usually 1.0-3.0 ppm. With the use of the Crystalline Pool System you can maintain your chlorine at the 1 ppm range with good results. Since chlorine is a known carcinogen and it’s fumes have been shown to be bad for asthma sufferers the fact that Crystalline allows you to reduce your chlorine levels about 70% is a very good thing!

Algaecide: To control the algal contaminants, the pool must typically be given a dose of algaecide once a week. Fortunately with the use of Crystalline you should not have a need for an algaecide unless you have the uncommon yellow mustard algae.

Clarifier: The annoying cloudy water problem can be resolved by adding a dose of clarifier to the pool water. Clarifying agents make the tiny particles stick to each other, to form larger particles. These larger particles then either settle to the bottom of the pool to be vacuumed up or are trapped by the filter. The good news is that clarifiers are not needed when using Crystalline since it contains a flocculent!

Calcium Level: Water that is too low in calcium becomes corrosive, while water high in calcium results in scale formation. This is why checking the calcium hardness is very important. This test has to be conducted at local pool store, as the standard testing kit does not test for calcium hardness. A sample of the pool water needs to be taken to your local pool store and tested.

Alkalinity: Correct total alkalinity will prevent sudden changes in the pH levels of the pool water. 80-120 ppm is the proper range for total alkalinity; the level can be adjusted by the addition of baking soda.

Overall by using Crystalline your pool water will be more stable and Calcium and Alkalinity levels will fluctuate less and your total chemical use will be lower.

Swimming pool filters are prone to accumulate oil and grease, and have to be cleaned by using a ‘filter cleanser degrease r’. How often this is required is a direct result of bathing load and how diligent bathers are about showering off before going into the pool, especially if they have been using tanning oils/lotions. Usually most cartridge filters are only good for one cleaning and then will need to be replaced with a new filter.

As Needed
Shock Treatment: Shock treatments are important to destroy combined chlorine compounds (free chlorine is the active chlorine and is required, not combined or total). Shock treatment packages are sold locally, use according to the instructions on the package, shock during the evenings or when no one will be using the pool for several hours. This raises the level of free chlorine in the pool and also destroys germs and bacteria. With the proper use of Crystalline you will almost never need to shock your pool as the water will remain very clean and clear. You will save time, effort and money plus your pool will never look or feel better!

Metal Out Addition: Often tiny metal particles are found on the pool surface and can cause staining. They are very small and bypass the filter; they can be removed by adding a weekly dose of ‘Metal Out’ to the pool water. You should not need this product on a regular basis though and if you do, have the pool inspected by a professional to determine what the problem is.

So the question is, who in the world wants swimming pool algae, a green swimming pool or cloudy swimming pool water? No one should and it is completely unnecessary! With the proper knowledge and just a little effort, proper maintenance of your pool water can help prevent all the above problems. The best single product to make it easy to have a beautiful pool, with soft enjoyable water with a minimum of effort is the Crystalline Pool System!

CL Brumfield has been a do it yourself pool owner and pool professional for the last fourteen years. During that time he has consistently enjoyed a beautiful pool with soft, sparkling clear, enjoyable water. If you would like to use the same system that requires less time maintaining your pool and more time enjoying great clean, clear pool water visit our website. Too find out more about the Crystalline Pool System and our 60 day money back guarantee go to: [http://crystalclearpoolsolutions.com]

Article Source: http://EzineArticles.com/4200597